Description
Arduino Compatible 2.4GHz Wireless Transceiver Module.
Based on the NRF24L01 transceiver IC, this module allows communication on the license free ISM band. Despite its diminutive size, it supports on-air data rates of up to 2MB/S. No external components are required (other than your Duino’).
Basics of the nRF24L01 Module:
It uses the 2.4 GHz band.
It has 125 different channels.
It can both send and receive the data simultaneously.
It can operate with baud rates from 250Kbps up to 2 Mbps.
Each nRF24L01 module can communicate with up to 6 other modules.
It can send 1 to 25 bytes of raw data at the transmission rate of 1 MB.
Features
• Protocol: SPI.
• Easy to program.
• Chipset: NRF24L01.
• Output Power: 1mW.
• Built-in voltage regulator.
• Ultra-low power consumption.
• Includes a built-in 2.4Ghz antenna.
• Maximum operating speeds up to 2Mbps.
• Operating Voltage: 3.3V (5V tolerant logic).
• Particularly suitable for industrial control applications.
• Low-power 1.9 ~ 3.6V, only 1uA on Power-down mode.
• Standard DIP Pitch Interface for embedded applications.
• Can be directly connected to a variety of microcontrollers including Arduino.
• Built-in hardware CRC error detection, Multipoint communication address control.
• Employs Gaussian frequency-shift keying (GFSK) to reduce radio frequency interference issues.
• 125 Channels, Multi-point communication and frequency hopping to meet the communication needs.
• Available software to set the address, only received local address when output data (Provide interrupt instruction).
Specifications:
Sold as: Each.
Packaging: Bulk.
Sensor IC: NRF24L01.
Required Supply Voltage: 3.3V.
Product category(s): Arduino, Arduino Daughter Boards & Modules.
Height: 9mm.
Width: 17mm.
Length: 34mm.
Image is for illustrative purposes only. Due to camera, lighting, monitor and manufacturer variations, colours may vary.
Package includes:
- 1x NRF24L01 2.4GHz Wireless Transceiver Module Microcontroller For Arduino