1B70007 84x48 Nokia 5110 LCD Module with Blue Backlight adapter

  • Sale
  • Dhs. 30.00
  • Regular price Dhs. 50.00


Product information

1. Parameters

  •     Power supply voltage:2.7V-3.3V
  •     Data interface level:2.7-3.3V
  •     Backlight power supply voltage:highest 3.3V
  •     Module size:43.6mm x 43.1mm(width X height)
  •     Installation diameter:2mm
2. Connection

      RST        --------    reset

      CE          --------    chip selection

      DC          --------   data/commands choice

      DIN        --------    serial data line

      CLK        --------    serial Clock Speed

      3.3V       --------    VCC

      LIGHT    --------    backlight control terminal

      GND      --------    power negative

3. Features:
  • 84 X 84 dot matrix LCD,can show 4 lines of characters
  • Use serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the arduino,AVR,PIC,STM32,STC MSP430 and so on.Transfer rate up to 4Mbps,can full speed write display data without waiting time.
  • Can use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.
  • LCD controller/driver chip has been bound to LCD chip,the volume of LCD is small
  • Low power supply,the working current in normal situation is lower than 200?A,and has power-down mode

Package includes:

  • 1 x LCD5110 Blue Backlight Module 
  • 8 x pin header